How do you use a Stanley staple gun?

Electronic Heavy-Duty Staplers

How to Load Staples Into the Stanley Sharpshooter Stapler

  1. Ensure the handle safety is on and the handle is locked down.
  2. Release the loading latch at the end the stapler and pull the slide open.
  3. Lay a stick of staples in the loading channel with the legs of the staples facing up.
  4. Push the slide in until the loading latch clicks and catches.

how do you refill a heavy duty stapler? Electronic HeavyDuty Staplers Once you have found it, pull the feed tray out with your fingers. Locate the cartridge inside the feed tray and pull it out. Insert your refill staples into the cartridge. Add as many staples as you need to fill the cartridge and slide the cartridge back into the body of the stapler.

Similarly, you may ask, does Walmart sell staple guns?

STANLEY TR110S Heavy-duty Steel Staple

What size Staples does a Stanley tr110 use?

Uses TRA700 Series or Arrow T50 Staples from 1/4″ to 9/16″.

How does a staple gun work?

Method 1 Rear-Loading a Manual Staple Gun Locate the pusher rod at the back of the gun. Push in on the rod and pull it out to remove it. Load the staples legs-down over the guide rails. Reinsert the pusher until it locks in place. Test the staple gun on a piece of paper or wood.

What staples fit Stanley tr45?

STANLEY light duty stapler is suitable for everyday stapling needs. Lightweight with convenient handle lock for safe storage. Specifications. Features Jam Resistant, Uses Stanley TRA200 or Arrow JT-21 Light Duty Staples, Lock Down Handle, Durable, Lightweight Brand STANLEY Model TR45

Where do you put staples in a stapler?

Insert the strip of staples, points down, into the staple channel and close the top of the stapler, the magazine will slide back into its correct position and you’ll hear a small click. Some of our staplers, such as the Zero 01 or our range of Heavy Duty staplers, are front loading.

What type of staple gun do I need for upholstery?

The 5 Best Staple Guns for Upholstery: Porter-Cable Pneumatic Upholstery Staple Gun – Best Overall. Surebonder 9600B Pneumatic Stapler – Best Value. Stanley Light Duty Manual Stapler – Budget Buy. Stanley Electric Upholstery Staple Gun. BESTIRTOOL 3-in-1 Upholstery Staple Gun.

What is the difference between a brad nail and a finish nail?

Brad nails, or brads, are made of 18-gauge steel wire. Nail gauge sizes indicate the thickness of the nail. Thinner nails have higher gauge numbers. Finish nails, or finishing nails, are generally made of 15- or 16-gauge steel wire, making them slightly thicker in diameter than brad nails.

How do you load Stanley tre550z brads?

How to Load Brads Into a Stanley TRE550 Electric Stapler Unplug the device’s cord from the electrical socket to prevent accidental discharging of brads. Move the trigger lock into the “locked” position by sliding it towards the rear of the device. Turn the stapler upside down with the front of the stapler facing towards you.

What is a brad nail?

Brad nailers use what are called brads (hence the name). Brads are essentially a thinner gauge of nail used to attach lightweight trim. ?The great advantage of using a brad nailer vs finish nailer is that because brads are thin gauged and the head is much smaller, you won’t have to use wood putty to cover the hole.